But of course, then we decided to be ambitious and try installing crown molding. So we embarked on that project for all the rooms upstairs (except the bathrooms). We self-taught ourselves how to make the proper cuts, line it up properly, etc. so it was a bit of trial and error but it was really a fun project because we could really see an immediate difference. We ended up having to buy a new miter saw that had a tall enough 'fence' for the crown molding we selected, but fortunately for my husband, I firmly believe that these types of tools are a good investment so I never have any problems spending our money on things from Lowe's or Home Depot. Installing crown molding is definitely a lengthy project if you want the finished product to look professional, because first it has to be painted, then after installation of all the molding, the corners, seams, and nail holes need to be filled with wood putty, then sanded, and painted again with 2-3 more coats and finally caulked at the top and bottom. We used oil based paint for all the molding so that added an even more challenging aspect to the project (Phil does all the painting when we use oil based paint... he is meticulous and patient and the end result is always wonderful).
During this past year, we also decided to close up the pocket door entrance to our master bath from the hallway so that its only entrance would be from our bedroom. So we spent a weekend framing up the opening, installing new drywall, texturing, and painting. It was our first time doing a somewhat large area of drywall and texture ourselves and although most people wouldn't even notice the imperfections, we are not entirely satisfied with it and may end up re-doing this at some point in the future.
This year we also replaced the carpet upstairs. This was brought on by a coupon received in the mail for a great deal on carpet at CW Floors, where we had originally purchased our hardwood floors and kitchen tile the year before. So we selected a color and pattern of Stainmaster carpet and placed our order. We had a few weeks before the install date and in that time we decided that we needed to finish up things like painting all of the doors, door frames, and moldings, and replacing our baseboards. So we jumped head first into that project, ripping out all the old baseboards and carpet and installing all new baseboards, which again involved LOTS of painting with the oil based paint on Phil's part after it was installed. Fortunately I am able to help him during installation by measuring, holding, and planning while he does the actual saw cuts and nail gunning. We got it all done just in time for the carpet installation.
Next, we decided that we would install crown molding in all the rooms downstairs. This was another few weekends of work but again such a great end result!
Our other big project last year was the remodel of the guest bathroom upstairs. We ripped out the existing vanity, mirror, light fixture, and vinyl tile flooring. We left in place the tiled bathtub and the built in cabinets but otherwise it was mostly an overhaul. First we selected and purchased the new freestanding vanity from Cabinets to Go in Houston. We then matched the cream paint color on the new vanity and Phil used a paint sprayer to paint the existing built in cabinets and medicine cabinet to match the same color. This took 3 coats but was good practice with the spray gun because next year we want to use it to spray our kitchen cabinets! Next we embarked on our first tile project ever! We purchased 8"x12" travertine tiles from Floor & Decor for a great price, and bought a new wet saw so that we could install the tile ourselves. We watched a few YouTube videos and lots of HGTV to get tips and then went for it! It turned out pretty good and a few days later we did our 2nd tile project by installing 3"x6" white subway tiles along the back wall behind the vanity, up to about 42" above the floor. Next we did the patching of the wall where we had removed the old light box and relocated the electrical feed. Then we were ready to paint the wall, install the vanity, install the new mirror and light fixture, then finally hook up the plumbing, clean up and decorate. It all sounds so simple and quick when I list it here but especially with the holidays in there, this process took almost 2 months of weekends to complete. But we are very happy with the finished product and now we are ready to try some other tile projects.
Here is a photo of the bathroom BEFORE (when we bought the house):
and AFTER:
The last project we did just before Christmas was to install a new garbage disposal in our kitchen sink! We had lived for over a year without one and were very ready to change that. We picked a mid-range disposal (they range from very loud to very quiet and different horsepower) and brought it home after work on a Friday night and installed it. Putting the disposal in is the easy part because we already had electrical in place for it. The more tricky portion was reworking the plumbing pipes to accommodate the new setup. This required some critical and creative thinking on our part, probably mostly because we are not expert plumbers. :) The first night we worked for about 2 and a half hours and got it all completed, but the next morning we tested it some more and found a small leak. So we went back in and made some adjustments and have been leak free since before Christmas. We gave it a good test by having Christmas dinner at our house and lots of dishes to go with it, and were able to appreciate how great having a disposal really is!
On the forecast for 2011: painting the kitchen cabinets, installing an over-the-stove microwave, installing a tile backsplash in the kitchen, some landscaping, and of course furnishing and decorating the nursery!
No comments:
Post a Comment